A Q3.2 R T4 A T4
= Q3.2/开启排泥泵 = Q3.3/开启输送机 A Q3.3 = M3.1
A M3.1/停止1#搅拌机 AN Q3.0 = Q3.0
A M3.1/停止2#搅拌机 AN Q3.1 = Q3.1
A M3.1/ 开启回水泵 = Q3.5 = Q3.6 A Q3.6 = Q3.3
A Q3.3/延时1min开启 L S5T#15min SE T5 A T5 = Q3.4
A Q3.4/停止1#泵 AN Q3.3 = Q3.3
A Q3.4/停止2#泵 AN Q3.4 = Q3.4
A Q3.4/ 停止回水泵 = Q3.5 A Q3.6 = Q3.5 A Q3.5
L S5T#34min/等待34分钟 SE 6 A 6 = Q3.7 A Q3.7 A Q3.0 = Q3.8 JC Next
A I3.1/若处于手动则程序结束 BEU
附录B反应池PLC控制程序
Next1：
Call 100/对水位模拟量进行规划 IN: =MW10 HI_LIM: =5.00 LO_LIM: =0.00 OUT: =MD40 A I1.1 = M1.0
A M1.0/打开进水阀门，提升泵，搅拌器 = Q1.0 = Q1.1 = Q1.2 = Q1.3 = Q1.4
/判断SBR池是否处于高液位 A ( L MD40 L 3.85 >R ) = M1.1
A M1.1/当处于高液位，关闭进水阀门 AN Q1.0 = Q1.0
A M1.1 AN Q1.2 = Q1.2 = M1.2 =M1.2
A M1.2/开启鼓风机 = Q1.7 = Q2.0
A M1.2/ 开启回流污泥泵 = Q1.5 = Q1.6 = M1.3
A M1.3/开始曝气3小时 L S5T#3H SE T1 A M1.4 R T1 A T1 = M1.4
A M1.4/关闭鼓风机 AN Q1.7 = Q1.7 A M1.4
