Tune Up Procedure
Tune-up procedure
GSM &GPRS&WIFI&BT TEST Measurement Procedure: GSM
1.Connect EUT with CMU200 through RF cable.（通过RF线连接EUT（测试样品）和CMU200（终测仪））
2.Make a call from CMU200.（从CMU200带电话出去）
3.After setup a call,Set Power Level to 5 for GSM850 and 0 for PCS.（完成电话设置后，为GSM850设置功率级别到5并且PCS到0）
4.Measure the Output Power AV value. （评估AV的输出功率值） GPRS
1.Connect EUT with CMU200 through RF cable.
2.Enter engineering mode by dialing Number *#*#3646633#*#*（按工程模式码） 3.Select options(选择选项):”telephony”-----\4.Start the test.（开始测试） WIFI
1.Connect EUT with IQ2010 through RF cable
2.Enter engineering mode by dialing Number *#*#3646633#*#*
3.Select options one after another:\test tool\“connectivity”---\test\output power\4.Start WIFI test Bluetooth
1.Connect EUT with CMU200 through RF cable
2.Enter engineering mode by dialing Number *#*#3646633#*#*
3.Select options one after another:\test tool\“connectivity”\test\4.Start Bluetooth test.
Remarks: All Output Power are tested in Average Value specification （批注：所有的输出功率是平均值）
注：
请按照贵公司的实际手机信息完成。 标黄的部分为注意 标绿的部分为翻译
Table 1: GSM Speech
Target Value is Average Output Power Value GSM 900 Channel Target (dBm)（规定标准值） Tolerance ±(dB)（公差） Channel Target (dBm) Tolerance ±(dB)
Table 2: GPRS (GMSK Modulation) Target Value is Average Output Power Value GSM 900 GPRS Channel 1 Txslot 2 Txslots 3Txslots 4 Txslots Target (dBm) Tolerance ±(dB) Target (dBm) Tolerance ±(dB) Target (dBm) Tolerance ±(dB) Target (dBm) Tolerance ±(dB) Channel 1 Txslot 2 Txslots 3Txslots 4 Txslots
Target (dBm) Tolerance ±(dB) Target (dBm) Tolerance ±(dB) Target (dBm) Tolerance ±(dB) Target (dBm) Tolerance ±(dB) 975 32.5 3 31.5 3 30.5 3 28.5 3 GSM 1800 GPRS 884 29.5 3 28.5 3 27.5 3 25.5 3 699 29.5 3 28.5 3 27.5 3 25.5 3 513 29.5 3 28.5 3 27.5 3 25.5 3 124 32.5 3 31.5 3 30.5 3 28.5 3 62 32.5 3 31.5 3 30.5 3 28.5 3 Channel 975 32.5 2 GSM 1800 Channel 884 30 2 Channel 699 30 2 Channel 513 30 2 Channel 124 32.5 2 Channel 30 32.5 2
Table 3: WCDMA
Target Value is Average Output Power Value WCDMA Band 1 Channel Target (dBm) Tolerance ±(dB) Channel Target (dBm) Tolerance ±(dB) Channe Target (dBm) Tolerance ±(dB) Table 3: WiFi
Target Value is Average Output Power Value WiFi 802.11b Channel Target (dBm) Tolerance ±(dB) Channel Target (dBm) Tolerance ±(dB) Channel Target (dBm) Tolerance ±(dB)
Table 11.5: BT
Target Value is Average Output Power Value BT Channel Target (dBm) Tolerance ±(dB)
Channel 1 3 1 Channel39 3 1 Channel 78 5 1 Channel 1 14 2 WiFi 802.11g Channel 1 14 2 WiFi 802.11n Channel 1 13 2 Channel 6 13 2 Channel 11 13 2 Channel 6 14 2 Channel 11 14 2 Channel 6 14 2 Channel 11 14 2 Channel 9613 24 +1/-3 HSDPA Channel 9613 24 +1/-3 HSUPA Channel 9613 24 +1/-3 Channel 9750 24 +1/-3 Channel 9887 24 +1/-3 Channel 9750 24 +1/-3 Channel 9887 24 +1/-3 Channel 9750 24 +1/-3 Channel 9887 24 +1/-3
